careucar的部落格

AK500 plus Motorola dedicated programmer operation instruction:
1. Ak500 key programmer Motorola dedicated programmer operation instruction:
A: HC705: You need to remove the MCU, and then put MCU to Clamp of HC705 adapter.

Attention: pin 1 (the dot of MCU) should be targeted to the left button of HC705 clamp.
2. HC908/HC912/HC9S12/MPC and so on. After you choose the specific type, click "picture". Then you will see the detailed cable connection photo.

3. For MUC models like HC9s12x, if you do not know the specific Mask (such as 1L85D), via function "identify MCU", you can read the specific MCU type. Then go on to choose Mask (HC912 MCU, This MCU does not have ID, if use "identify MCU", then get MCU ID is "FF FF", like the following photo 2)