careucar的部落格

Renault ECU decoders will be recommended for you here.These two has been successfully tested by users, who talk about it on forums.

Device to use: Mini Pro TL866A EEPROM Programmer

/Wellon Universal Programmer

/Fgtech Galletto V54 Mater

ECU type: Renault Siemens Sirius 32N

Feedback:

Customer A

Device recommended: TL866 Mini pro programmer “if You are planning to work frequently on those ecu I recommend to buy TL866 Mini pro programmer.

With tsop44 adapter, this tool is very stable for reading F200 flash fitted on Sirius32”

Customer B

Device recommended: TL-866 programmer & Wellon programmer

I also have TL-866 programmer and that one is working good too.

wellon tells you which pins does not have good connections …

I bought TL-866 programmer with with tsop44 adapter… it’s good to have backup tools.

Customer C

Device recommended: Fgtech gallettoRead Siemens sirius 32 with Fgtech galletto on boot mode flash.

The wiring diagram below:

Red —————-> pin 29

Red —————-> pin 30

Black —————-> pin 3 ground

Green —————-> pin 56 K-Line

Yellow—————-> pin 26 L-Linea

Gray wire you can use for boot 29f200

(Gray wire has already 1000 ohm resistor )

Source:http://blog.obdexpress.co.uk/2017/09/28/renault-ecu-programming-with-tl866a-mini-pro-wellon-fgtech-galletto/