careucar的部落格

I try to program a new blank engine ECM on a 2013 Nissan Armada. I purchased the software file from Nissan website and one Nissan Consult III. I do not have Consult online synchronized with Assist. At first, I have no idea what folder to put this file in so Consult program will find.

I used ners and nissan file extracted to correct folders by it self. used unpack.exe

anyway here you go 6) For CONSULT III plus "Blank" ECU (ECM and non-IK TCM) Programming

Note 1: Before using this application, you will need to put the "programming" data file (*.dat) and the

management csv file you received with the download, in the C:\ReproProgramming folder (see screen capture

above under item # 5). Without the programming data and the management csv file in this folder, the C-III plus

application will not identify or display the applicable programming. The C-III plus software will check the part

number of the ECU on the vehicle and display the reprogram to be installed.

NOTE 2: If this is the first time using C-III plus for reprogramming, you may need to make the

C:\ReproProgramming folder. C-III plus does not automatically create the folder

http://blog.obd2eshop.com/tips-on-nissan-consult-iii-plus-ecu-programming/