careucar的部落格

Yanhua BMW Mini ACDP full package program BMW FEM BDC key without soldering.

Youtube Video:

Yanhua Mini ACDP program BMW FEM BDC key in words and pictures:

1. Prepare these:

2. Install Bridge support

3. Install bridge.

4. Align the testing point and then tighten the screws

5. Connect ICP socket

Connect OBP+ICP

Connect the offline OBD cable

6. Insert the ICP socket, pay attention to the Pin position.

7. Before inserting the ICP socket, check whether the ICP socket hand screw has been loosened upward and the thimbles retracted into the shell.

8. Retaining the screws after installation.

9. Insert into the CON7.

10. Insert into the CON8.

11. Connect OBD.

12. Connect the Bridge.

13. Plug the ACDP main unit.

14. Connect the power clamp.

15. Done.

As you can see, we need a full package of Yanhua Mini ACDP & adapters including

Yanhua Mini ACDP basic module + BMW FEM BDC authorization with module

SRC: http://www.obd2eshop.com/wholesale/yanhua-bmw-acdp-key-programmer.html 

SRC: http://www.obd2eshop.com/wholesale/yanhua-mini-acdp-fem-bdc-module.html