close

This is tech support from obdexpress.co.uk for those uses with Lonsdor K518ISE failed to connect the machine to any car listed in K518ISE vehicle list.

 

OBD test cable testing method…here you go.

 

Step 1: Unplug the K518ISE main unit and turn it off

 

Step 2: Connect the DB25 cable(OBD cable) to k518ISE main unit, using a

multimeter and switch to the diode stalls

Pay attention that there are 3 connectors on the OBD cable:

Connector 1: connect K518ISE OBD port;

Connector 2: connect KPROG adaptor

Connector 3: connect the vehicle OBD port

lonsdor-k518ise-connection-1

 

Pic 1: 3 connectors on OBD cable

 

Step 3: Use the red pen to touch the metal part(as shown in pic 2 in red)

lonsdor-k518ise-connection-2

 

Pic 2: Metal part on K518ISE OBD port

 

Step 4: Use the black pen to test the resistance of each pin of the vehicle

connector (As shown in pic 3) , make sure that you hold the vehicle connector in the way just as the pic shows:

lonsdor-k518ise-connection-3

 

Pic 3: 16 pins on the vehicle OBD connector

 

PIN 1 and 8 should have no resistance; PIN2,3,4,5,6,7,9,10,11,12,13,14,15,16

should have resistance.

If all have no resistance, then it will be DB25 cable has problem; if the

measurement is all as it supposed to be, and the car models(those K518ISE

supported models) still can’t be connected, then you will need to send back the

DB25 cable and the main unit for Lonsdor to check(if so, let us @obdexpress.co.uk know, and we shall talk together about the solution and details,thanks)

 

http://blog.obdexpress.co.uk/2018/06/05/solved-lonsdor-k518ise-cant-be-connected-to-any-car/

 

 

arrow
arrow
    文章標籤
    Lonsdor K518ISE
    全站熱搜
    創作者介紹
    創作者 careucar 的頭像
    careucar

    careucar的部落格

    careucar 發表在 痞客邦 留言(0) 人氣()