careucar的部落格

FVDI J2534 is very simple to use and easy to install. You only need to do two steps to Installs

software. First,Install FVDI J2534 start software,then install the original brand vehicle

software,For example, Ford, Mazda, Honda, Toyota. However, it is important to note that

these software cannot be installed in the same computer If you want to use these software

via FVDI J2534 equipment, please install different software on different computers.

Note: the software installation are not required installation sequence.

System Requirements:

Get FVDI J2534 equipment software from compact disc(CD)

Put the CD in the computer CD drive

Wait a while before opening the CD in the resource manager,you will see the equipment

related software and resources.

Get FVDI J2534 equipment software from official website download link

Access to http://flyobd.com/download-center/

Please register and log in

Download FVDI-J2534-FM (FM,Short for Ford and Mazda)

Download IDSFord or IDSMazda

Download the latest release IDS software and save it to local.

Install the latest release IDS software

Double-click the “IDS-110.01_Full.exe” to start installation

Select language,and click “next” button

Wait a while,and the following windows will pop out,click “Yes”,then click “next”

Select “i accept the terms of the license agreement”, and then click “next”, and then

click “next”, and then click “install”. The installation process will take some time,please

wait patiently.

Reboot your computer after installation

Install the FVDI J2534 software

Open compact Disc and find FVDI-J2534 software and double-click the

“FVDI_J2534_Ford_Setup.exe” software

Select Setup Langeuage and Click “Ok”

It will install SVCI Based software list, Click “next” directly, and then Click “next” all the

time untill it jump a window “Select Setup Language”, which is selected the device

driver’s installtion language. 

Install the device driver,and click “Next” all the time untill install Shield wizard complete, and then click “finish”.

When you open FVDI J2534 for ford software after installtion, an error window will pop

out. That means you have not connect FVDI J2534 equipment with your computer, as

show in the below. connect your device with computer,and the FVDI J2534 software will

be opened normally

when you put FVDI J2534 equipment to connect the computer and open the software,

it will pop below error message, it means you do not connected vehicle ECU module and

the ECU voltage can not less than 8 volts. After using the OBD interface of FVDI J2534 to

connect the ECU,and the software can be opened normally and put into use.

Note: Cannot open the IDS software on the desktop directly,it is recommmended to delete

the IDS software shortcut on the desktop.