careucar的部落格

When you use BMW ICOM A+B+C diagnostic head with ICOM ISTA-P/D software, but the IP address cannot be found, how to solve this problem?

Here is the suggestion from a professional technician working at obdiitool.co.uk.

If you have the same problem, you can try to set ICOM WLAN.

Step 1: Open Itool Radar to identify the BMW ICOM info

Step 2: Acess the ICOM configuration url through IE

Here take IP address: http://169.254.33.45:58000/ as an example,the address is subject to the actual reading.

Step 3: Select WLAN Settings and enter the corresponding available WiFi info

Confirm the info entered and click Save Changes to save

Step 4: Disconnect the network cable and power supply, then restart ICOM

Wifi will be connected automatically when starting ICOM

Note: If you use our sotware and USB- WiFi, the ICOM configuration info is:

Mode: 802.11n, 2.4GHz

SSID: ISAP

Security Type: WPA2 Personal

Pre-shared key: BmwAp24h

Tech support: http://www.obdiitool.co.uk/

Source:http://blog.obdiitool.co.uk/solve-bmw-icom-next-abc-cannot-find-ip-address/